Wirelessly Connect you PCs in your home or small business.  It's PC support designed just for you!

ONLY $525 for all Hardware and Labor to install a 54Mbps Wireless-G Network!

The Upgrade Installation includes hardware and labor to install and configure a 54Mbps Wireless-G Network Router and two PCs using either 54Mbps Wireless-G USB Adapter on desktop computers or 54Mbps Wireless-G Notebook Adapter on your laptop computers.

Add additional PCs for $100/PC when you set up the network.  Add PCs at a later date for $150/PC.

System Requirements

• Existing Broadband Internet connection (DSL, Cable, Satellite, Canopy)

• PC with 200MHz or Faster Processor

• 128MB Ram Memory

• Internet Explorer 5.0 or higher

• CD-ROM Drive

• Windows 2000 or XP

Upgrading your PC If hardware does not meet the minimum requirements: Wireless Family Network will assist in contacting a local vendor in Lake County who can upgrade your personal computers.  

A 54Mbps Wireless-g network in your home or business lets you share a single broadband Internet connection with every computer in your home or business.  It wirelessly connects all the PCs on your own local area network (LAN). 

You will be able to:

• Share files and printers
• Back up important data
• Surf the Web simultaneously
• Eliminate dial-up accounts
• Allows each member of the family to have their own PC connection
• Surf the Web in "Hotspots" like airports, hotels, Starbucks
• SAVE $$, by not adding additional wiring to your home or business

Key Benefits

• Set up a high-speed 54Mbps Wireless-g (802.11g) network in your home or office

• Data rates up to 54Mbps -- 5 times faster than 11Mbps Wireless-b (802.11b)

• Also interoperates with 11Mbps Wireless-b networks at 11Mbps

• Advanced wireless security with WPA, 128-bit WEP encryption, and MAC filtering

Why 54 Mbps Wireless-G?

54Mbps Wireless-g is the upcoming 54Mbps wireless networking standard that's almost five times faster than the widely deployed 11Mbps Wireless-B (802.11b) products found in homes, businesses, and public wireless hotspots around the country — but since they share the same 2.4GHz radio band, 54Mbps Wireless-g devices can also work with existing 11Mbps Wireless-b equipment.

Connects Wireless-G and Wireless-B

The Linksys Wireless-G Access Point lets you connect Wireless-G or Wireless-B devices to the network. Since both standards are built in, you can protect your investment in existing 802.11b infrastructure, and migrate your network clients to the new, faster Wireless-G standard as your needs grow.

Web Based Configuration

To protect your data and privacy, the Wireless-G Access Point can encrypt all wireless transmissions, and supports the industrial-strength security of WPA. The MAC Address filter lets you decide exactly who has access to your wireless network. Configuration is a snap with the web browser-based configuration utility.

Increased Flexibility

Future-proof your wireless network with the Linksys Wireless-G Router.  You'll enjoy Wireless-B connectivity today, and be prepared for a high-speed Wireless-G tomorrow.

Contact us at info@MyWFN.com or call 847.833.8823.

To read the PDF files included with this web site, you may need to upgrade your free Adobe Reader at Adobe Acrobat plug-in.

[ Home ] [ Up ]

Send mail to info@MyWFN.com with questions or comments about this web site.
Copyright © 2003 Wireless Family Network  Last modified: 08/17/04